MIC ULTRA+

• 
• BerryBase in Germany : 

Features:

Imput:

• onboard microphone Left, Right
• Jack microphone
• Jack line input
• push button

Outputs:

• 1.3w onboard stereo spakers (pre-soldered)
• 1.3w output stereo for external speakers
• Headphone jack stereo
• red led

Features:

• 65x30x15mm (compact Raspberry pi Zero format=
• Compatible with raspberry 4 (all version), Raspberry 3 (all versions), Zero (all versions)
• Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
• Integrates WM8960 low power stereo CODEC, communicates via I2S interface
• Integrates dual high-quality MEMS silicon Mic, supports left & right double channels recording, nice sound quality
• Onboard standard 3.5mm earphone jack, play music via external earphone
• Onboard dual-channel speaker interface, directly drives speakers
• Supports sound effects such as stereo, 3D surrounding, etc.
• Headphone output (24bits)​ WM8960
• input / output Mixer
• Hardware volume control
• 24 Bit I2S Dac​
• 2×1.3W Stereo Amplifier for external speakers​
• Stereo onbard speakers
• 2 Onboard microphones​
• Stereo 3.5mm LINE jack input
• Stereo 3.5mm MICROPHONE jack input

• CODEC: WM8960
• Power supply: 5V
• Logic voltage: 3.3V
• Control interface: I2C
• Audio interface: I2S
• DAC signal-noise ratio: 98dB
• ADC signal-noise ratio: 94dB
• Earphone driver: 40mW (16Ω@3.3V)
• Speaker driver: 1.3W per channel (8Ω BTL)

To use as a standalone speaker (expect the same quality and power as a high end phone).
To use with as pair of old non amplified system from a backyard sell. Could be used for radio project, standalone art project,as a all in one audio card, project where you need to record live audio or play it using speakers or headphones.